ultra wide stretched LCD displays questions

What is the height of the 42″ display?Ultra wide stretched LCD. I’m interested in one of your ultra wide stretched LCD displays in 42″. Is this possible? thank you.What is the cost for such a screen and do you ship to Canada?Do you have any PDF brochure of your screen models that you can send? We are mostly interested in the ultra wide stretched models 17 – 19 – 23 and 28 inch, and sun readable display kits  (7 inch, 12 inch and 15 inch) with touch screen and IP65.

Our requirements have changed on LCD specs since my last email, below is what we now require,

 Outline Dimension: 345mm x 130mm (+/-10mm)

Active area Dimension: 315mm x 110mm (+/-10mm)

Resolution: 1920 x xxx (preferable FHD cut panel)

Aspect Ratio: 16:3

Pixel Pitch: 0.22 (H) x 0.22(V) mm, (110 ~ 120 DPI/PPI or less)

Response time: 15ms or less

Brightness: minimum 250nits and higher

Contrast Ratio: 3000:1 (1000 : 1 at the minimum)

 Do you have a solution (custom/off the shelf) that will match this specs. It doesn’t have to be a 19” 1/3 panel any more but the resolution, dimensions and the pixel pitch is quite critical.

 Ok just to confirm, the one off mould fee is to cut the panel dimensions to still have the 1920 wide resolution with our desired dimensions so this is fully customised to our specifications. Is that correct?

Yes, 1920 can not be changed.   For the wide, we can cut it according to your requirements 1~1080.

  But you have to choose the led driving board, this is also the customized board for this type lcd.  

 More so, can you  please confirm the make of the original base panel?

The original panel is based on the market stocks, i confirmed it is 1920×1080 21.5″ panel, but i am not sure which model.  Maybe we use the attachment original panel.


The 495mm can not change it. This is the length.


For width,  we can change it according to your requirements. But require the customized, there is the mould fee. You only need to pay the mould fee the first time. Around $1000.  If you can accept, we will send the drawing to you confirm and customized the mould for this lcd.

The product is the same price as 17.5″.

The resolution has to be 1920 wide so it has to be cut from 21.5” panel.  I was hoping we can achieve the acceptable dimensions by either streamlining the bezels or cutting out a non-standard resolution of possibly 16:2 instead of 16:3.

 The length of the panel (495mm from your specs sheet) is not an issue, the problem is with the width. Is there a way of reducing the width even further so we get  495x100x12mm (or something closer)?

  19“ Ultra wide stretched LCD (Model SUN-U19-360)


I confirmed with our engineers, our 19″ lcd dimension is large than your requirements.

 But we can supply the customized 17.5″ lcd, the dimension is similar as your mentioned.

Resolution is 1366*384, viewing area 410x115mm,outline dimension 428x136x12mm

Because it required the customzied, so i do not have the specification.

Thanks for your response, please see quantities below

Samples: 5 Samples

Annual production Qty: 5k to 8K

Do you have a full specs documents of the LCD.  The physical dimensions looks slights too big for the application We’ll see if there is a way to adapt it but in the meantime,

What are the cost implications of having a more specific physical dimensions as stated below

 Outline Dimension: 435mm x 120mm x 15.1mm (+/-10mm)

Resolution: 1920 x 360 (preferable FHD cut panel)

Aspect Ratio: 16:3

Pixel Pitch: 0.22 (H) x 0.22(V) mm, (110 ~ 120 DPI/PPI)

Response time: 15ms or less

Brightness: minimum 250nits and higher

Contrast Ratio: 3000:1 (1000 : 1 at the minimum)


Please kindly findthe attachment specification.   

If it is ok, please kindly send me your order quantity, then i will give you the best price.  thank you.

We are currently looking for a  19” 1/3 FHD (1920×360) panels and saw the SUN-U19-360 which might suit our solution.

Is this product an off the shelf item? If so can you please provide the latest specification sheet for review and some costing based on sample units and production qtys (details of specific quantity requirements can be discussed).